Features
Globe and angle configuration for flexibility in design and installation
PVC and glass reinforced nylon construction
Filtered pilot flow to resist debris and clogging of solenoid ports
Slow closing to prevent water hammer and subsequent system damage
Manual internal bleed operates the valve without allowing water into the valve box
One-piece solenoid design with captured plunger and spring for easy servicing Prevents loss of parts during field service
Non-rising flow control handle adjusts water flows as needed
Normally closed, forward flow design Options (order separately)
Accommodates optional, field installed PRS-D pressure regulating module
Optional purple flow control handle for easy identification of non-potable water system
PGA-NP-HAN (1” and 11 ⁄2”)
PGA-NP-HAN2 (2”)
Accepts latching solenoid for use with Rain Bird battery-operated controllers up to 150 psi (10.35 bar)
Compatible with ESP-LXD decoders Operating Range
Overview
Whether the job calls for a globe or angle valve, PGA Series valves are the right choice. Loaded with features, these heavy-duty PVC valves are economical, easy to install and built to withstand constant 150 psi (10.35 bar) pressure and 2 to 150 gpm (0.45 to 34.05 m3 /h; 7.8 to 568 l/m) flows.
Specifications:
Pressure: 15 to 150 psi (1.04 to 10.35 bar)
Flow: 2 –150 gpm (0.45 to 34.05 m3 /h; 7.8 to 568 l/m)
Flow with PRS-D: 5 –150 gpm (1.14 to 34.05 m3 /h; 19.2 to 568 l/m)
Water Temperature: up to 110° F (43° C)
Ambient Temperature: up to 125° F (52° C) Electrical Specifications
Power: 24 VAC 50/60 Hz (cycles/sec) solenoid